Apprentice Machinist Level 3

Summary

The successful candidate will machine components to the highest standard on CNC lathes and will provide exceptional customer service whilst striving to keep a clean and safe working environment. The role requires a motivated, reliable, confident and results driven individual who longs to be challenged.

Wage

£16,500 a year

Training course

Machining technician (level 3)

Hours

Monday - Friday, 9.00am - 5.00pm. Hours may differ for 18+ year olds.

37 hours 30 minutes a week

Start date

Tuesday 1 September 2026

Duration

3 years 6 months

Positions available

1

Work

Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.

What you'll do at work

• To manufacture components to AESSEAL drawings in stainless 316L, Phosphor Bronze, and other materials on multiple machines
• Work to tight deadlines in a pressurised working environment to fulfil our corporate promise of exceptional customer service
• Verifying and editing CAM programmes in order to ensure components are manufactured to the desired quality and efficiency standards
• Interpret complex engineering drawings
• Perform quality checks as per AESSEAL procedures using measuring equipment and/or CMM
• Strictly adhere to safe working practices and highlight any potential hazards to relevant team leaders
• Maintain a clean work area

N.B this list is not exhaustive, the job holder is required to carry out reasonable tasks within their level of skill and ability.

Where you'll work

Unit 4, Venlo Industrial Estate
Knowles Street
Bradford
BD4 6HA

Training

Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.

Training provider

CALDERDALE COLLEGE

Training course

Machining technician (level 3)

What you'll learn

Course contents

• Comply with statutory health and safety regulations and procedures.
• Comply with environmental, ethical and sustainability regulations and procedures: safe disposal of waste, re-cycling or re-use of materials and efficient use of resources.
• Prepare and set up conventional or CNC machines.
• Operate and adjust conventional or CNC machines.
• Apply risk assessment and hazard identification processes and procedures in the work area.
• Monitor, obtain and check stock and supplies, and complete stock returns.
• Record information - paper based or electronic. For example, energy usage, job sheets, risk assessments, equipment service records, test results, handover documents and manufacturers' documentation, asset management records, work sheets, checklists, waste environmental records and any legal reporting requirements.
• Read and interpret information. For example, data and documentation used to produce machined components.
• Apply engineering, mathematical and scientific principles.
• Plan and organise own work and resources.
• Follow and apply inspection, quality assurance procedures and processes.
• Select machining process.
• Select and setup tooling and work holding devices.
• Set and adjust machine operating parameters. For example, setting feeds and speeds for roughing and finishing operations, loading, proving and validating programs when using a CNC machine tool.
• Apply machining operations and techniques to produce complex components with features. For example, parallel; stepped; angular diameters and faces; grooves; slots; recesses and undercuts; radii and chamfers; internal and external forms and profiles; reamed; bored; drilled and electro eroded holes; internal and external screw threads.
• Measure and check components.
• Select and check condition of tools and equipment. Identify issues, resolve and take action as needed.
• Identify and action issues in the manufacturing process.
• Apply fault-finding and diagnostic testing procedures to identify faults. Diagnose and resolve issues. Escalate issues.
• Maintain the work area and return any resources and consumables.
• Communicate with others verbally. For example, colleagues and stakeholders.
• Follow machine shut down, safe isolation, handover, start up or warm up procedures. Escalate issues.
• Apply continuous improvement techniques. Devise suggestions for improvement.
• Apply ethical principles.
• Apply team working principles.
• Comply with statutory health and safety regulations and procedures.
• Comply with environmental, ethical and sustainability regulations and procedures: safe disposal of waste, re-cycling or re-use of materials and efficient use of resources.
• Prepare and set up conventional or CNC machines.
• Operate and adjust conventional or CNC machines.
• Apply risk assessment and hazard identification processes and procedures in the work area.
• Monitor, obtain and check stock and supplies, and complete stock returns.
• Record information - paper based or electronic. For example, energy usage, job sheets, risk assessments, equipment service records, test results, handover documents and manufacturers' documentation, asset management records, work sheets, checklists, waste environmental records and any legal reporting requirements.
• Read and interpret information. For example, data and documentation used to produce machined components.
• Apply engineering, mathematical and scientific principles.
• Plan and organise own work and resources.
• Follow and apply inspection, quality assurance procedures and processes.
• Select machining process.
• Select and setup tooling and work holding devices.
• Set and adjust machine operating parameters. For example, setting feeds and speeds for roughing and finishing operations, loading, proving and validating programs when using a CNC machine tool.
• Apply machining operations and techniques to produce complex components with features. For example, parallel; stepped; angular diameters and faces; grooves; slots; recesses and undercuts; radii and chamfers; internal and external forms and profiles; reamed; bored; drilled and electro eroded holes; internal and external screw threads.
• Measure and check components.
• Select and check condition of tools and equipment. Identify issues, resolve and take action as needed.
• Identify and action issues in the manufacturing process.
• Apply fault-finding and diagnostic testing procedures to identify faults. Diagnose and resolve issues. Escalate issues.
• Maintain the work area and return any resources and consumables.
• Communicate with others verbally. For example, colleagues and stakeholders.
• Follow machine shut down, safe isolation, handover, start up or warm up procedures. Escalate issues.
• Apply continuous improvement techniques. Devise suggestions for improvement.
• Apply ethical principles.
• Apply team working principles.

Training schedule

This training schedule has not been finalised. Check with this employer if you’ll need to travel to a college or training location for this apprenticeship.

Requirements

Essential qualifications

GCSE in:

Maths and English (grade 4/ C or above)

Desirable qualifications

BTEC in:

Engineering / Manufacturing (grade Pass)

Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.

Skills

• Engineering drawings knowledge
• Experience of a CMM ideal
• measuring equipment knowledge